Fujitsu Mini-Split Systems In Cleveland


Mini-Split Systems Work to Provide You With the Best Home Comfort

If you have a boiler heated home, or a home without ductwork, then a Fujitsu mini-split system is perfect for you. Even if you have a HVAC system in your home, these systems can be an excellent choice for heating and cooling certain rooms or a single room that your current system isn't servicing properly.

What is a Mini-Split System and How Does it Work?

This is another form of heating and air conditioning you can install in new homes or retro fit in older homes. They come with many benefits and are a high efficiency and cost effective choice for heating and cooling specific areas or rooms in your home.

These systems have two primary components, an outdoor compressor and an indoor air-handling unit. A conduit, which houses the power cable, refrigerant tubing, suction tubing, and a condensate drain, links the outdoor and indoor units. This conduit only requires a 3-inch hole in an outside wall.

There’s no need to cut holes in walls or ceilings, and you can get rid of costly space heaters, window fans, and portable A/C units. No matter the size of your space, or whether you’re looking to improve comfort in just one or up to eight rooms, the innovation of this system will meet your highest expectation.

Do you have an area in your home that needs heating and cooling, but don’t know where to begin?

At Wilson Heating & Cooling Co., we install mini-split systems to give you the ability to avoid a major renovation of ductwork, yet still get the home comfort you're looking for with efficient heating and cooling.

How to Get Your Mini-Split System

Greater Cleveland homes are unique and many of them can benefit from modern, customized heating and cooling solutions — like a mini-split heat pump system from Wilson.

For homes with a boiler system, limited ductwork or hard-to-heat or cool areas, this system can add comfort that may have seemed out-of-reach in the past. By adding individually controlled "zones," you can improve the heating and/or cooling in the areas you use most or a single room.

Our experts at Wilson can design and install a mini-split configuration specifically for your needs. Contact us today at (216) 352-4758 to learn more about your options for a mini-split system for your home.

Check Out Our HVAC Products

We provide the most durable and reliable, energy-efficient brands, so you can live comfortably, all the time. We have 25+ years of installation and service experience with Trane products and other high-efficiency heating and air conditioning equipment.

View Our Products

Benefits of Installing a Mini-Split System

Energy Efficient: Because there are no ducts, mini-split systems lose less than 5% cooling vs. up to 40% for traditional forced-air systems. Increased efficiencies up to 33-SEER mean lower utility bills. Several models are Energy Star qualified, meaning they save you money and protect the environment.

Individual Zoning: You can set the mini-split to have different zones. Why pay to heat or cool areas that no one is occupying? Individual zoning gives you the flexibility to heat or cool only the areas you need and can be configured to cool a single room or multiple zones or a whole home.

Quiet Operation: Fujitsu air conditioners are comprised of an indoor and outdoor unit, which allows for minimal noise and a peaceful indoor environment. This enables the contractor to install louder components like compressors and motors outdoors.

No Ducts: Copper tubing running through a small 3-inch opening in the wall or ceiling easily connects the indoor and outdoor units. Refrigerant is cycled through the lines from the outdoor condensing unit to the indoor unit, where the air is quietly distributed to the interior space from the cooling system.

Versatility: The system can be used to heat or cool areas in your home that are hard to reach. This is a popular choice for older homes that have been traditionally difficult to equip with central air conditioning.

Year Round, Whole Home Comfort: A mini-split system provides you with the right amount of heating and cooling needed by installing up to 8 indoor units connected to one outdoor unit. Indoor units vary by size and style and each creates its own "zone" of comfort, allowing you to heat or cool individual rooms, hallways and open spaces.

Dozens of References

We've installed these systems in your neighborhood...

  • Glencairn Rd.
  • Sutherland Rd.
  • Dorchester Rd.
  • Drexmore Rd.
  • Chadbourne Rd.
  • Braemer Rd. (3)
  • Norwood Rd
  • S. Woodland Rd.
  • Ingleside Rd.
  • Sherrington Rd.
  • Shelbourne Rd.
  • Chalfant Rd.

And, our latest Fujitsu Installations this past summer...

  • Demington Rd.
  • Falmouth rd.
  • Malvern Rd.
  • Shelley Rd.
  • Braemar Rd.
  • Fernway Rd.
  • Sutherland Rd.
  • Shaker Blvd.